Rotating laser level receiver designed for use with either a hand-held staff clamp, or a magnetic excavator mount.
When used with an excavator, the strong magnetic mount holds the CR600 laser receiver firmly in place on the dipper arm. The CR600 can also be used on skid steer machines. To set up the CR600 on an excavator, typically the machine bucket will be lowered to the required depth, with the dipper arm vertical, and then the CR600 is attched to the dipper arm at such a height that it is on target with the rotating laser. Thus as the excavator works across the site, the CR600 will show `on target` when the bucket bucket is down at the same depth as before.
Features
- Designed for tough construction site conditions. Rugged, waterproof, lightweight magnesium housing can withstand a drop of up to 3 m (10 ft) on concrete
- Super-bright colored LED elevation indicators visibly indicate grade elevation information to the operator even in poor light and up to 100 m (350 ft) in bright sunlight
- Adjustable bandwidth lets the operator tighten the on-grade band to easily meet a variety of accuracy requirements with tighter tolerances from rough grading through form leveling
- Wraparound receiver cells with continuous pickup through an operating range of 270 degrees provide less dead spots and improved productivity, especially for machine applications
- Longer, above-grade receiver cells make digging with a back hoe easier than ever
Kit Includes
- CR600 Receiver
- Batteries
- C50 rod clamp
- C51 magnetic machine mount
